LM-B, Magnetic Lifter, Lifting Magnets, Magnetic Tools

LM-B, Magnetic Lifter

• Product Name:
  Magnetic Lifter
  
  
• Model Number:
  LM-B
  
  
• Description:
  Applications
  
  Use the LM-B SERIES to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. It's perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Rated for up to 2000kgs! magnetic lifting device
  
  Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
  Rated for loads up to 2000kgs.
  Eliminates dangerous straps and slings
  Fast, safe, efficient loading and unloading
  Use our handy application survey to help us determine the correct model for your lifting needs.
  

  Note: On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet. WARNING: Never lift more than the maximum rated load. magnetic lifting devices Operation Simply move the lever to the "ON" position to engage the magnet. Spring-loaded lock keeps the magnet engaged until you release it.

  Maximum Rated Load Plate Steel

  
  

  Model	Material	Maximum Rated Load	Minimum Thickness
  LM-150B	plate steel	150kg	20mm
  LM-300B	plate steel	300kg	25mm
  LM-600B	plate steel	600kg	30mm
  LM-1000B	plate steel	1000kg	45mm
  LM-2000B	plate steel	2000kg	55mm

  
  

  Model	Material	Maximum Rated Load	Diameter Range	Minimum Length
  LM-150B	round steel	80kg	50-200	20mm
  LM-300B	round steel	150kg	25-300	25mm
  LM-600B	round steel	300kg	100-500	30mm
  LM-1000B	round steel	500kg	150-700	45mm
  LM-2000B	round steel	1000kg	150-800	55mm

  
  

  Dimensions(mm)

  
  

  Model	A	B	C	D	E	F	G	H	Wt.
  LM-150B	105	85	120	125	60	70	40	30	3kg
  LM-300B	180	155	155	185	90	95	50	40	9kg
  LM-600B	250	225	210	260	115	120	75	50	23kg
  LM-1000B	280	240	287	370	165	170	95	87	50kg
  LM-2000B	420	380	350	500	215	215	105	125	120kg

  
  
  

  Lifting power depends upon carbon content of stock, stock thickness, and surface finish.
  Lifting Power BY MATERIALS carbon content M1 Low Carbon 100% M2 Moderate Carbon 85% M3 High Carbon 75% M4 Cast Iron 70%	Effect of Surface Finish surface finish F1 Ground Surface 125% F2 Rough Machined 100% F3 Foundry Finish 90% F4 Rough Cast 65%

  
  

  Percent of Lifting Power (by thickness of material)

  
  

  Thickness	Depth	LM-150B	LM-300B	LM-600B	LM-1200B	LM-2400B
  T1	2.36 in	100%	100%	100%	100%	100%
  T2	2.16 in	100%	100%	100%	100%	100%
  T3	1.97 in	100%	100%	100%	100%	95%
  T4	1.77 in	100%	100%	100%	100%	90%
  T5	1.57 in	100%	100%	100%	100%	85%
  T6	1.38 in	100%	100%	100%	90%	75%
  T7	1.18 in	100%	100%	100%	80%	65%
  T8	0.98 in	100%	100%	90%	70%	55%
  T9	0.79 in	100%	90%	75%	60%	45%
  T10	0.59 in	100%	70%	60%	50%	35%
  T11	0.39 in	70%	50%	45%	35%	25%
  T12	0.20 in	40%	30%	25%	20%	15%

  
  

  Calculation Example: LM-600B, rated lifting power is 600 kg. The formula for calculating range of lifting capacity is: T x F x M x G x Capacity.

  T = Thickness F = Surface Finish M = Material G = Air Gap ELM-600 Example: T8, F1, M2 and G 90% x 125% x 85% x 100% x 600 = 573.75kg

  
  
• More Photo:
  
  
  Learn more about products detailed description, pricing and service, Please send mail to us!